COMPANY HEADER
Print Back
The Godwin 4" (100 mm) Heidra® 100TD hydraulic submersible® pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4" (100 mm) submersible® hydraulic top discharge pump. With variable speed diesel engine power, the Heidra® 100TD can meet a variety of flow and head requirements up to 800 gpm (182 m³/h.) and 130 feet (39.6 m) of total dynamic head with a simple throttle adjustment. Top discharge design enables the pump to be lowered into a 19.5" (495 mm) diameter opening. Add the ability to pass solids to 2" (50 mm) diameters, dry running capabilities, a cast chromium steel impeller, and you have a rugged dewatering/solids-handling, hydraulic submersible® pump ready to go anywhere.
Unit of Measure

Specifications

Brands

 N/A Heidra®

Fuel Consumption @ 2200 Revolutions Per Minute (rpm) (Full Load)

 N/A 1.21 g/h4.58 L/h

Bearing and Seal Housing

 N/A Cast Iron

Lifting Bracket

 N/A Fabricated Mild Steel Tube and Plate

Standard Input Flow

 N/A 8.8 USGPM0.56 L/s

Aluminum Pump Weight

 N/A 90 lb41 kg

Cast Iron Pump Weight

 N/A 141 lb64 kg

Power Pack Pump Weight

 N/A 1230 lb558 kg

Output Flow

 N/A 8.8 USGPM0.56 L/s

Suction Filter (Pleated Gauze)

 N/A 125 µ

Series

 N/A HS

Submersible Pump

Hydraulic Motor

 N/A Gear Type

Drive Pressure

 N/A 3350 psi231 bar

Hydraulic Flow

 N/A Up to 8.8 USGPMUp to 38.7 m³/h

Maximum Hydraulic Line Length

 N/A 300 ft

Solids Handling Diameter

 N/A Up to 2 inUp to 50 mm

Pump Speed

 N/A Up to 2200 rpm

Impeller Diameter

 N/A 8.4 in213 mm

Discharge Flange - ASA 150

 N/A 4 in100 mm

Hydraulic Connections Port Type

 N/A Quick-Disconnect

Strainer

 N/A M.S. Fabrication Nylon Coated with 1.75 in. (44 mm) Square Apertures

Hydraulic Pipe Connections (American Petroleum Institute (API))

 N/A 0.75 in19 mm

Power Pack

Hydraulic Pipe Connections

 N/A 0.5 in. (13 mm) Quick-Disconnect Case Drain 0.75 in. (19 mm) Quick-Disconnect Feed and Return

Engine

 N/A JD3016D 28 hp (21 kw) @ 2000 rpm Yanmar 3TNV88, 28 hp (21kw) @ 2000 rpm

Fuel Tank Capacity

 N/A 30 gal

Output Hydraulic Flow

 N/A 8.8 USGPM38.7 m³/h

Output Pressure Control

 N/A Up to 3350 psiUp to 231 bar

Hydraulic System

 N/A Two Pipe, Open Circuit

Hydraulic Reservoir Capacity

 N/A 10 gal37.8 L

Supply Line Filter (Pleated Gauze)

 N/A 125 µ

Return Line Filter

 N/A 20 µ

Control Valve

 N/A Through Variable Speed Engine

Materials

Impeller

 N/A Cast Steel

Wearplates

 N/A Cast Iron

Mechanical Seal

 N/A Double Mechanical Seal in Oil Bath
Inboard: Silicone Carbide
Outboard: Carbon on Ceramic

Pump Casing and Suction Cover

 N/A Aluminum or Cast Iron

Pump Shaft

 N/A Mild Steel

Note

N/A Heidra® and the color orange for pumps are registered trademarks of Godwin Pumps of America, Inc.

Specifications and illustrations are subject to revision without notice. © Copyright 2004 -2005 Godwin Pumps of America, Inc. All rights reserved.

© Copyright 2006 Godwin Pumps of America, Inc..