COMPANY HEADER
Print Back
The Godwin Heidra® 150NC hydraulic submersible® pump is an extremely powerful yet compact pump with flow capabilities to 1,700 USGPM and discharge heads to 181 feet.

The Heidra® 150NC features the unique patented N-technology with its innovative self-cleaning impeller. Godwin N-pumps deliver the highest total efficiency. It lowers your fuel bill and reduces unplanned maintenance costs.
Unit of Measure

Specifications

Brands

 N/A Heidra®

Suction Connection with Stainer

 N/A 6 in

Delivery Connection - Female National Pipe Thread (NPT (F))

 N/A 6 in

Maximum Capacity

 N/A 1700 USGPM

Maximum Head

 N/A 181 ft

Maximum Solids Handling

 N/A 1.7 in

Maximum Impeller Diameter

 N/A 11.0 in

Maximum Operating Temperature

 N/A 176 ºF

Maximum Working Pressure

 N/A 72.5 psi

Maximum Suction Pressure

 N/A 58 psi

Maximum Casing Pressure

 N/A 108.8 psi

Maximum Operating Speed

 N/A 2200 rpm

Engine Speed

 N/A 2400 rpm

Hydraulic Motor (Power Pack - GHPU30)

 N/A Gear Type

Hydraulic Pump Displacement (Power Pack - GHPU30)

 N/A 3.6 in³

Wet Weight (Power Pack - GHPU30)

 N/A 3.349 lb

Hydraulic Pump Displacement (Pump End)

 N/A 3.0 in³

Wet Weight (Pump End)

 N/A 386 lb

Power Pack Length

 N/A 119 in

Power Pack Width

 N/A 66 in

Power Pack Height

 N/A 77 in

Pump Length

 N/A 23 in

Pump Width

 N/A 18 in

Pump Height

 N/A 32 in

Maximum Hose Length for 2000 Revolutions Per Minute (rpm) Engine

 N/A 131 ft

Maximum Hose Length for 2200 Revolutions Per Minute (rpm) Engine

 N/A 115 ft

Maximum Hose Length for 2400 Revolutions Per Minute (rpm) Engine

 N/A 98 ft

Maximum Hose Length for 2600 Revolutions Per Minute (rpm) Engine

 N/A 66 ft

Series

 N/A HS

Industry Standards/Certifications

 N/A International Organization for Standardization (ISO) 9001:2008

Submersible Pump

Hydraulic Motor

 N/A Gear Type

Drive Pressure

 N/A 3500 psi

Hydraulic Flow

 N/A 32 USGPM

Pump Speed

 N/A 2178 rpm

Power Pack

Engine

 N/A John Deere 4045TF290 (72.4 hp @ 2400 rpm)

Output Hydraulic Flow

 N/A 32 USGPM

Hydraulic Reservoir Capacity

 N/A 40 gal

Hydraulic Hose

Feed/Return

 N/A 1 in. Male Hydraulic Fitting x 1 in. Female Hydraulic Fitting with Wing nuts

Bleed Line

 N/A 1/2 in. Hydraulic Quick Connect x 1/2 in. Hydraulic Quick Connect

Materials

Impeller

 N/A Hard Iron

Wearplates

 N/A Rear - Cast Iron BS1452 Gr220
Front - Hard Iron

Mechanical Seal

 N/A Silicon Carbide vs Silicon Carbide

Pump Casing and Suction Cover

 N/A Cast Iron to BS1452 Grade 220

Pump Shaft

 N/A Carbon Steel BS 970-3:1991 080M40

Suction Strainer and Lifting Bracket

 N/A Fabrication Mild Steel Tube and Plate

Note

N/A All information is approximate and for general guidance only.

Godwin pumps, Dri-Prime® and the color orange for pumps are registered trademarks of Godwin Pumps of America Specifications and illustrations are subject to revision without notice. Xylem Dewatering Solutions is not liable for any incompleteness or inaccuracies. Xylem Dewatering Solutions is not liable for any consequential, incidental or indirect damages relating to these specifications or their use.