COMPANY HEADER
Print Back
The Godwin Dri-Prime® HL100M pump offers flow rates to 920 USGPM and has the capability of discharge pressures to 165 psi.

The HL100M is able to automatically prime to 28' of suction lift from dry. Automatic or manual starting/stopping available through integral mounted control panel or optional wireless-remote access.
Unit of Measure

Specifications

Brands

 Dri-Prime®

Suction Connection

 4 in. 150# ANSI B16.5

Delivery Connection

 4 in. 150# ANSI B16.5
Maximum Capacity1 920 USGPM

Maximum Solids Handling

 1.4 in

Maximum Impeller Diameter

 14.6 in
Maximum Operating Temperature2 176 ºF

Maximum Working Pressure

 165 psi

Maximum Suction Pressure

 87 psi

Maximum Casing Pressure

 248 psi

Maximum Operating Speed

 2200 rpm

Control Options

 Automatic Manual

Suction Lift

 28 ft

Series

 HL

Materials

Pump Casing and Suction Cover

 Cast Iron BS EN 1561:1997

Wearplates

 Cast Iron BS EN 1561 - 1997

Pump Shaft

 Carbon Steel BS 970:1991 817M40T

Impeller

 Cast Steel BS3100 A5 Hardness to 200 HB Brinell

Non-Return Valve Body

 Cast Iron

Mechanical Seal

 Silicon Carbide Face; Viton Elastomers; Stainless Steel Body

Note

N/A All information is approximate and for general guidance only.

© 2014 Xylem, Inc. All rights reserved. Godwin is a trademark of Xylem Dewatering Solutions, Inc., a wholly-owned subsidiary of Xylem Inc. Specifications and illustrations are subject to revision without notice. Xylem makes no representation regarding the completeness or accuracy of this information and is not liable for any direct or indirect damages arising from or relating to this information or its use.

  • 1 Larger diameter pipes may be required for maximum flows.
  • 2 Please contact our office for applications in excess of 176 ºF.