COMPANY HEADER
Print Back
The Godwin Dri-Prime® HL200M pump offers flow rates to 2540 USGPM and has the capability of discharge pressures to 139 psi.

The HL200M is able to automatically prime to 28' of suction lift from dry. Automatic or manual starting/stopping available through integral mounted control panel or optional wireless-remote access.
Unit of Measure

Specifications

Brands

 N/A Dri-Prime®

Suction Connection

 N/A 8 in. 150# ANSI B16.5

Delivery Connection

 N/A 6 in. 150# ANSI B16.5
Maximum Capacity1 N/A 2540 USGPM

Maximum Solids Handling

 N/A 1.5 in

Maximum Impeller Diameter

 N/A 15.7 in
Maximum Operating Temperature2 N/A 176 ºF

Maximum Working Pressure

 N/A 139 psi

Maximum Suction Pressure

 N/A 87 psi

Maximum Casing Pressure

 N/A 209 psi

Maximum Operating Speed

 N/A 2000 rpm

Control Options

 N/A Automatic Manual

Suction Lift

 N/A 28 ft

Series

 N/A HL

Materials

Pump Casing and Suction Cover

 N/A Cast Iron BS EN 1561:1997

Wearplates

 N/A Cast Iron BS EN 1561 - 1997

Pump Shaft

 N/A Carbon Steel BS 970:1991 817M40T

Impeller

 N/A Cast Steel BS3100 A5 Hardness to 200 HB Brinell

Non-Return Valve Body

 N/A Cast Iron

Mechanical Seal

 N/A Silicon Carbide Face; Viton Elastomers; Stainless Steel Body

Note

N/A All information is approximate and for general guidance only.

© 2014 Xylem, Inc. All rights reserved. Godwin is a trademark of Xylem Dewatering Solutions, Inc., a wholly-owned subsidiary of Xylem Inc. Specifications and illustrations are subject to revision without notice. Xylem makes no representation regarding the completeness or accuracy of this information and is not liable for any direct or indirect damages arising from or relating to this information or its use.

  • 1 Larger diameter pipes may be required for maximum flows.
  • 2 Please contact our office for applications in excess of 176 ºF.