COMPANY HEADER
Request Information
The Godwin 6" (150 mm) Heidra® 150MR hydraulic submersible® pump offers improved performance and operating efficiencies that cannot be matched by standard electrical submersible® models. With variable speed diesel engine power, the Heidra® 150MR can meet a variety of flow and head requirements up to 1900 gpm (120 L/sec.) and 160 feet (48.8 m) of total dynamic head with a simple throttle adjustment. Add the ability to pass solids to 3" (75 mm) in diameter, dry running capabilities, a cast chromium steel impeller, and you have a rugged dewatering/solids-handling, self-contained hydraulic submersible® pump ready to go anywhere.
Unit of Measure

Specifications

Brands

 N/A Heidra®

Bearing and Seal Housing

 N/A Cast Iron

Lifting Bracket

 N/A Fabricated Mild Steel Tube and Plate

Weight

 N/A 355 lb161 kg

Discharge - Female National Pipe Thread (NPT (F))

 N/A 6 in150 mm

Power Pack Pump Weight

 N/A 2996 lb1359 kg

Output Flow

 N/A 32 USGPM121 L

Suction Filter (Pleated Gauze)

 N/A 125 µ

Flow

 N/A 32 gal121 L

Series

 N/A HS

Submersible Pump

Hydraulic Motor

 N/A Gear Type

Drive Pressure

 N/A 3500 psi241 bar

Solids Handling Diameter

 N/A Up to 3 inUp to 75 mm

Pump Speed

 N/A Up to 2200 rpm

Impeller Diameter

 N/A 11 in279 mm

Hydraulic Connections Port Type

 N/A Quick-Disconnect

Strainer

 N/A M.S. Fabrication Nylon Coated with 2.75 in. (70 mm) Square Apertures

Power Pack

Hydraulic Pipe Connections

 N/A 1 in. (25 mm) Wing nut Quick-Disconnect Fittings

Engine

 N/A Caterpillar 3054NA 74 hp (55 kw) @ 2200 rpm John Deere 4045D 72 hp (53 kw) @ 2400 rpm

Output Pressure Control

 N/A 3500 psi241 bar

Hydraulic System

 N/A Two Pipe, Open Circuit

Hydraulic Reservoir Capacity

 N/A 40 gal151 L

Return Line Filter

 N/A 20 µ

Control Valve

 N/A Via Variable Speed Engine

Materials

Impeller

 N/A Cast Steel

Wearplates

 N/A Rear - Mild Steel
Front - Cast Iron

Mechanical Seal

 N/A Double Mechanical Seal in Oil Bath
Inboard: Silicone Carbide
Outboard: Carbon on Ceramic

Pump Casing and Suction Cover

 N/A Cast Iron

Pump Shaft

 N/A Medium Carbon Steel

Note

N/A Heidra® and the color orange for pumps are registered trademarks of Godwin Pumps of America, Inc.

Specifications and illustrations are subject to revision without notice. © Copyright 2003 Godwin Pumps of America, Inc. All rights reserved.